ATLAS - elastic impactable acetabular cup -

The Atlas^® range

ATLAS^® a full range :

The TA6V ELI titanium alloy Atlas cup comes in 12 sizes from 46 to 68 mm OD in 2 mm increments.
In order to use ATLAS in some particular situations (including with revisions and dysplasia acetabulums), cups in extreme sizes are available : 40, 42, 44, and 64, 66, 68, 70, 72, 74.
Because of the small number of cases, those sizes are not part of the usual range offered to surgeons, but they can be supplied on request.

The polyethylene cores are available in 3 ID sizes : 22.2, 28 and 32 mm.
A series of alumina inserts is also available.

Please note that the alumina/PE implant should only be used with Alumina heads with a 28 mm diameter, ref. 234131 - 234132 - 234133 made by Fournitures Hospitalières Industrie.

The features and numbers below are based on the OD of the cup
Matching PE inserts are available in various IDs.

DESIGNATION		SIZE AND PART NUMBER

CUP	OD in mm	46	48	50	52	54	56	58	60	62
	ATLAS III-P	241363	241364	241365	241366	241367	241368	341369	341370	241371
	ATLAS IV	217413	217414	217415	217416	217417	217418	217419	217420	217421

INSERT (inside diameters in mm)	INSERT C PE 22,2	232139	232140	232141	232142	232143	232144	232145	232146	232147
	STANDARD INSERT PE 28	217522	217523	217524	217525	217526	217528	217529	217530	217531
	EDGE INSERT PE AL 28	217461	217462	217463	217464	217465	217466	217467	217468	217469
	ALUMINA 28 INSERT	.	.	234104	234105	234106	234107	234108	234109	234110
	STANDARD INSERT PE 32	.	.	217538	217539	217540	217541	217542	217543	217544

DESIGNATION		EXTREME SIZES

CUP	OD in mm	40	42	44	64	66	68	70	72	74
	ATLAS III-P	.	.	.	241372	241373	241374	.	.	.
	ATLAS IV	222506	222510	217412	217422	217423	217424	217425	217426	217427

INSERT (inside diameters in mm)	INSERT C PE 22,2	222508	222509	217489	217499	217500	217501	217502	217503	217504
	STANDARD INSERT PE 28	.	.	.	217532	217533	217534	217535	217536	21537
	EDGE INSERT PE AL 28a	.	.	.	217470	217471	217472	217473	217474	217475
	ALUMINIUM OXIDE 28 INSERT	.	.	.	.	.	.	.	.	.
	STANDARD INSERT PE 32	.	.	.	217545	217546	217547	217548	217549	217550

Diam 6.5 mm SCREWS	Length in mm	15	20	25		30	35	40	45	50
Diam 6.5 mm SCREWS	Part n°	207110	207111	207113		207115	207117	207120	207122	207123

Welcome - The various Atlas - Primary stability - Insert stability - Insert thickness - Secondary stability - Alumina/Alumina - Explant analysis
Low-friction - Surgical procedure - Clinical data - Quality requirement - The inventor - Contact - International distribution